TA183"HUCKEBEIN"
An exiting model
for the jet fans
A superfast
model , and a pussy in the landing.
|
As you
can see on the image we have added fences on the wings,
these are necessary
for
good flying, without it the TA183 will spin out of the
air sooner or later, but now it is a delight to fly.
You
need of cause to be capable of flying a fast jet, cause
the TA183 is ballistic.
With a
speed 480 and 8 cells 700 ma it is a fast moving jet ,
but a bit of short duration,
With
the Plettenberg 200-20-6 and 10 cells 1250 ma , it is
already superfast,
but
with the Kontronik Fun 400-28 and 12 cells CP1300 it is
ballistic ,
You can
get even faster with the Kontronik 480 type but we
choose the 400-28 for duration also
Now we
can fly with ease 3 minutes plus full speed.
|
|
Design Features:
 All
Formers And Ribs CNC Cut Unique
Tab Lock DesignOne
Piece Design
Specifications:
Wing
Area: 14 dm2 Wing
Span; 800 mm Flight
Weight: Starts at 900 grams Wing
Loading: 64gr dm2 to 75gr dm24
Channel Elevator, Ailerons & Throttle (ailerons mixed
for slower landing speed)
Kit
Includes:
Photo
Instructions Full
Size Rolled Cad Plans With All Parts ShownVacuformed
Canopy , Intake Duct and Motor Cover Paper
Intake Tube , PVC Outlet TubeControl
Horns , Steering Cables Now
Included! Waterslide Decals As On The Model
Required to Complete:
Any
inexpensive 3 Channel RadioLight
weight Receiver: Light
weight Servos: About 9 gramsMotor:
Speed 480 BB Race to Kontronik Fun 400-28 Electric
Speed ControllerWemotec
Mini Fan 480Battery:8x700
ma to 12 x CP1300Thick
and Thin CA glue Bungee
Launch req.The
Huckebein needs a 8mmx7,5mtr bungee with 8kg of pulling
power.
|
Now some building pictures for
impression.
Wings are straight forward
Basic fuselage
Intake tube
Added some sheeting
Tailplane and Elevator
Wings with joiners
Not going in to much details, but finished
Tailplane control
Battery access
Underside
Hardware installation
Ready
Kit contents