Hawker Hunter EDF 90mm
Movie of first flight
Second flight
RC-Network forum build
Movie from Roger Stein, cool music to
Another cool movie from Roger Stein
For 90mm edf or Turbine
Design Features:
All Formers And Ribs 170 cnccut parts in balsa and ply
Unique Tab Lock Design
Removable wings for easy transportation
and Storage
Specifications:
Wing Area: 40 dm2
Wing Span; 1125 mm
Lenght :1500mm
Flight Weight: Starts at 4000 grams
4 Channel , Ailerons,Elevator Throttle,Retracts,Flaps
Kit Includes:
Photos and Instructions Download here, Full cd download here
Full Size Rolled Cad Plans With All Parts Shown
Vacuformed Canopy,nose cone,gun cowls
PVC/Paper Outlet and inlet Tube
All wood and sheeting to make the Hunter
Required to Complete:
There is no hardware in this kit !
Any 7 Channel Radio
Light weight Receiver:
Servos: About 25 grams metal gear 3pcs servo 13gr metal gear 3pcs
Motor: Hetrc EDF650/1500 serie or for more power use the 1600KV
Wemotec Midi fan Evo 90mm
Battery:8S lipo 5000ma
Thick and Thin CA glue, 3/3
Steel wire for front retract steering and ailerons ,flaps,elevator
Small parts not in kit:
Canopy closing
Hinges ca type
Flap hinges 4x
hatch hinges 8x
Fastener 2,9x13 12x for retract mounting
steering wire 1,2mm 1x
Retract legs , steel 4mm mm bend yourself for grass recomended, or use commercial units
Wheels Main 80-85mm Front 55mm
Retracts used:
Servoless Retract with Metal Trunion 44mm x 41mm Mount (2pcs)
https://hobbyking.com/en_us/servoless-retract-with-metal-trunion-44mm-x-41mm-mount-2pcs.html
Servoless Steerable Nose Retract with Metal Trunion 44mm x 41mm Mount
https://hobbyking.com/en_us/servoless-steerable-nose-retract-with-metal-trunion-44mm-x-41mm-mount.html
Glass finish : 2mtr 25 gr glass and we used PS100 polyurethane or G4
Now some building pictures:
Rudder made in 2 halves , very light mounting in fuselage with 6mm dowelsT
The Stabilizer mounts in the rudder
Wing made in 2 halves
servos for ailerons and flaps installed the joining of the halves is with spruce joiners
Fuselage: made of self aligning cnccut parts, no need for complicated jigs just some build
board supports made of scrap balsa is sufficient
Intake ducts made from stiff paper and strenghtend with balsa stringers
Fuselage is strip sheeted , fairings are cnccut, all included
Vacuumformed nosecone , makes life easyer
Fitting the inner panels of the wing needs some attention
Ready to finish
Many more pictures on the included disk with instructions
Product Code: HAWAQ9Y563
