Change Currency: EUR

Change Language: Deutsch Dansk English (UK) English (US) Español Française Dutch

El Cheapo 10 amp controller


Product Information

GX 10A Brushless ESC


To choose another option, you need restart from step 1.

Options Table 1 (for Aircraft version Normal mode):



(with 0.5s break)

Option 1

–, –


Cell Type:


Auto detect LIPO cells and set LIPO

protection cut-off;

Slow down at 3V per cell of LiPo, Cut-50%


cut-off at 2.9V per cell LiPo.

(option 2, will be disabled automatically)

Option 2

– – , – –


Cell Type:


(Default setting)

Select NIMH protection mode

Cut-to 50% power when voltage lower to

60% of starting voltage (0.72V each cell of


(option 1 will be disabled automatically)

Option 3

– – – , – – –










Working Voltage: 2S-3S LiPo or 4-9 NiCd/NiMh



Load continues: 10 Ampere (with proper cooling)

Load Peak: 15A (10 sec)

BEC: 2A at 5V.

PWM: 8 Khz

Dimensions: 23.5x15.7x6.1mm

Weight: 8 Gram

Programming Instructions:

1. Connect your motor and receiver to the speed controller, but do not connect the battery


2. Turn on your transmitter and full up the throttle stick. Please Note: Most Futaba

transmitters have the throttle channel reversed by default.

3. Connect your battery and you will hear a starting beep tone. After 3 seconds, the motor

will start beeping a sequence as following. All beeps repeat only once.

4. To select, move the throttle stick in off position, between Beeps repeat. Then you will

hear a confirmation sound.

5. Each time when you select an option, it will exit programming menu and is ready to use.

Product Code: ELU9

Customer Reviews

This product hasn't been reviewed yet. Write a review


Copyright RBCkits 2016-2017

Mobile Site

"RBCkits" uses cookies to improve its website. For more details and how to manage cookies, please see our privacy policy.

I accept cookies from this site.

eCommerce by CubeCart