WeMoTec Midi Fan Evo Ducted fan unit / HET 650-68-1500,
completely assembled, precision balanced and harmonically tuned
89 mm ducted fan unit (11-blades)
6-8s Lipo cells
2,3-3,7 kp of thrust
completely mounted, checked, completely balanced and harmonically tuned.
Modern high efficiency multi bladed fan unit.
The fan unit comes completely mounted with a HET 650-68-1500 motor.
The unit is assembled and checked at factory, precision balanced and harmonically tuned.
Readings| | 6s | 7s | 8s |
| Voltage | 22,2 V | 25,9 V | 29,6 V |
| Current | 51,5 A | 63,5 A | 80,0 A |
| Power | 1143 W | 1645 W | 2368 W |
| rpm | | | |
| thrust | 2,31 kp | 2,92 kp | 3,69 kp |
| efflux velocity | 61,06 m/s | 68,81 m/s | 77,33 m/s |
| efficiency | 0,60 | 0,60 | 0,59 |
| controller | > 60 A / LV | > 80 A / HV | > 90 A / HV |
| Battery | 2.500-3.400 mAh | 3.100-4.200 mAh | 4.000-5.300 mAh |
The controller should be chosen 20% over rated due to the long lasting load
LV = low voltage controller up to 6s, HV = high voltage controller above 6s
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Set comprises:
1 x Midi Fan pro ducted fan unit
1 x HET 650-68-1500
| inner diameter: | 89,0 mm |
| outer diameter: | 92,0 mm |
| length of shroud: | 60 mm, w/o intake lip |
| weight, complete: | 402 grams (opt. intake ring + 19g) |
| fan swept area: | 49,40 sqcm |
| rotor: | 11 blades, Nylon (glass reinforced) |
| | |
| rec. thrust tube dia.: | 75 mm diameter |
| Timing ESC: | approx. 6° (4-pole motor) |
| PWM: | 8-12 kHz |
Readings:
We measure with a constant voltage of 3.7 V / cell.
Current and thrust are measured with a small intake lip (r=6 mm) at 21° C, 50m asl and standard pressure.
Depending on battery, controller and installation you may see higher or lower figures.
Product Code: MIDAA1CK65
